BLUETTI’s Elite 100 V2 and Jackery’s Explorer 1000 v2 land at the same price, $499 on each brand’s US store on October 17, 2026, and both hold about a kilowatt-hour of LiFePO4. The differences are in what goes in and what comes out. BLUETTI lists the Elite 100 V2 at 1,024Wh with an 1,800W inverter, 1,000W of solar input and a 140W USB-C port. Jackery’s support page lists the Explorer 1000 v2 at 1,070Wh with a 1,500W inverter, 3,000W surge, 400W of solar and a 22dB fan rating, in a 10.8kg (23.8 lb) case that’s lighter than BLUETTI’s roughly 25.3 lb. Here’s how they compare for camping, outages and everyday backup.
As an Amazon Associate I earn from qualifying purchases, at no cost to you.
Sources: BLUETTI figures come from the Elite 100 V2 user manual and BLUETTI’s US store; Jackery figures come from Jackery’s support page Explorer 1000 V2 Basic Information (updated August 20, 2026) and Jackery’s product page. My own math is labelled as estimates.
Bottom line first
| Priority | Winner | Why |
|---|---|---|
| Running bigger appliances | Elite 100 V2 | 1,800W continuous vs 1,500W |
| Solar charging | Elite 100 V2 | 1,000W input vs 400W |
| Laptop charging | Elite 100 V2 | 140W USB-C vs 100W |
| Quiet operation | Explorer 1000 v2 | Jackery rates the fan at 22dB or less |
| Weight | Explorer 1000 v2 | About 23.8 lb vs 25.3 lb |
| Motor startup surge | Explorer 1000 v2 on paper | 3,000W surge rating listed |
| Warranty | Elite 100 V2 | 60 months vs 3 years (5 with Jackery’s extension) |
Full spec comparison
| Spec | BLUETTI Elite 100 V2 | Jackery Explorer 1000 v2 |
|---|---|---|
| Capacity | 1,024Wh LiFePO4 (51.2V, 20Ah) | 1,070Wh LiFePO4 |
| Rated cycles | 4,000+ to 80% | 4,000 to 70% |
| AC output | 1,800W, 120V | 1,500W total across 3 outlets, 120V |
| Surge / boost | Power Lifting runs resistive loads rated up to 2,700W (output stays 1,800W) | 3,000W instantaneous |
| USB-C | 140W + 100W | 100W + 30W |
| USB-A | 2 × 15W | 1 × 18W |
| 12V | Car outlet 12V/10A + 2 × DC5521 | Car outlet 12V/10A |
| AC charging | 600W standard; 1,200W Turbo (80% in about 45 min) | About 1.7 hours (1,000W ±50W); Jackery’s store advertises a 1-hour emergency charge |
| Solar input | 1,000W, 12–60V, 20A | 400W over two ports (200W, 10.5A each), 16–60V |
| Car charging | 12V or 24V outlet | 12–16V, 8A; about 12 hours |
| UPS switchover | 10ms or less | Within 20ms |
| Fan noise | 50dB max | 22dB or less |
| Standby draw | Not listed | 18W |
| Expansion | Not supported | Not supported |
| App | Wi-Fi and Bluetooth | Wi-Fi and Bluetooth |
| Weight | About 25.3 lb | About 10.8kg (23.8 lb) |
| Size | 12.6 × 8.5 × 9.8 in | 32.7 × 22.4 × 24.7cm (12.9 × 8.8 × 9.7 in) |
| Discharge temperature | -4 to 104°F | 14 to 113°F (-10 to 45°C) |
| Warranty | 60 months | 3 years, extendable to 5 |
| Price (brand US stores, Oct 17, 2026) | $499 | $499 (black) |
Output: 1,800W versus 1,500W
The extra 300W of continuous output gives the BLUETTI more room for kitchen and shop loads. A 1,500W electric kettle, a 1,650W hair dryer or a 1,700W induction burner at full power will run on the Elite 100 V2 and overload the Jackery’s 1,500W ceiling. BLUETTI’s Power Lifting mode goes further for resistive loads: it lets heaters and kettles rated up to 2,700W run by holding output at 1,800W, so they simply run at reduced power.
The Jackery counters with a 3,000W instantaneous rating, which helps motors such as a refrigerator or small air compressor get started. BLUETTI’s manual doesn’t list a separate surge figure for the Elite 100 V2 in the same way, so for compressor-driven appliances, compare each one’s startup draw against the specs. Our surge watts guide explains how.
Solar: a 2.5× gap
This is the biggest spec difference. BLUETTI rates the Elite 100 V2 for 1,000W of solar at 12–60V and 20A on a single input. Jackery splits the Explorer 1000 v2’s 400W across two parallel ports at 200W each.
| Solar setup | Elite 100 V2 (estimate) | Explorer 1000 v2 (Jackery figure) |
|---|---|---|
| 1 × 200W panel | About 6–7 hours | About 7.5 hours (SolarSaga 200W) |
| 2 × 200W panels | About 3–3.5 hours | About 3.8 hours |
| 4 × 200W panels (800W) | About 1.5–2 hours | Capped at 400W; about 3.8 hours |
| 5 × 200W panels (1,000W) | About 1.3 hours in strong sun | Not supported (1, 2 or 4 panels only) |
BLUETTI estimates assume panels deliver about 75% of rating plus 10% charging loss. Jackery’s support page also notes three panels aren’t supported and both ports must carry identical panels. For the full Jackery wiring rules, see our Explorer 1000 v2 solar charging guide, and for BLUETTI, how to charge a BLUETTI with solar.
One caveat on the BLUETTI: 1,000W through a single 12–60V, 20A input requires series strings near 50–60V at full current. Smaller arrays work fine but won’t reach the maximum.
Wall charging
BLUETTI gives you a choice: 600W Standard charging for battery longevity and quiet, or 1,200W Turbo for about 80% in 45 minutes. Jackery’s support page lists about 1.7 hours to full at roughly 1,000W, while the product listing advertises an emergency 1-hour charge. In practice, both are fully charged within about two hours from a wall outlet.
Noise and standby
Jackery rates the Explorer 1000 v2’s fan at 22dB or less, which is quieter than a whisper. BLUETTI lists 50dB as the Elite 100 V2’s maximum, typically reached while Turbo charging or under heavy load. For a bedroom CPAP setup or a quiet campsite, the Jackery has the edge on paper. Jackery also lists an 18W standby draw, worth remembering if you leave the AC outlets on overnight with nothing plugged in: that’s about 430Wh a day, or 40% of the battery.
Runtime: nearly identical
With 1,024Wh versus 1,070Wh, runtimes are within about 5%. Using 85% of rated capacity as a working figure:
| Load | Draw (assumed) | Elite 100 V2 (estimate) | Explorer 1000 v2 (estimate) |
|---|---|---|---|
| CPAP, no humidifier | 40W | About 22 hours | About 23 hours |
| Starlink Mini + laptop | 80W | About 11 hours | About 11.4 hours |
| Full-size fridge, cycling | 150W | About 5.8 hours | About 6 hours |
| Microwave | 1,200W | About 43 minutes | About 45 minutes |
| Kettle at 1,700W | 1,700W | About 31 minutes | Over the 1,500W limit |
Ports and daily use
- Laptops: the Elite 100 V2’s 140W USB-C can fast-charge a 16-inch MacBook Pro at full speed; Jackery’s tops out at 100W.
- 12V gear: both have a 12V/10A car outlet; BLUETTI adds two DC5521 barrel ports.
- USB-A: BLUETTI has two 15W ports, Jackery one 18W.
- AC outlets: Jackery has three. Check the BLUETTI manual for its exact outlet layout before planning multiple plugs.
Apps and smart features
Both connect over Wi-Fi and Bluetooth, but they emphasize different settings.
- BLUETTI app: the Elite 100 V2 manual lists toggles for Power Lifting, Turbo Charging and ECO mode, AC output frequency switching, and a Grid Self-Adaption mode with an adjustable maximum grid charging current, useful on weak campground or generator power.
- Jackery app: Jackery’s support page lists output on/off control, auto-shutdown, Quiet Charging, a Battery Saving Mode that holds charge between 15% and 85%, screen scheduling and control of the built-in LED light. It doesn’t offer adjustable AC charging speed or charging schedules.
Jackery also lists self-discharge of about 1–3% a month in storage, so a full Explorer 1000 v2 can sit in a closet for months between hurricane seasons. Either way, check the charge every few months.
Who should buy which
| Buyer | Pick |
|---|---|
| Van or RV owner with roof solar | Elite 100 V2 |
| Outage backup for kitchen appliances | Elite 100 V2 |
| Bedroom CPAP or quiet campsite | Explorer 1000 v2 |
| Carrying it often, every pound counts | Explorer 1000 v2 |
| Already own Jackery SolarSaga panels | Explorer 1000 v2 |
| Laptop-heavy remote work | Elite 100 V2 |
Both are on Amazon: the BLUETTI Elite 100 V2 and the Jackery Explorer 1000 v2. For deeper dives, read our Elite 100 V2 review, the Jackery 1000 v2 vs 2000 v2 comparison, and Anker SOLIX C1000 Gen 2 vs Elite 100 V2 if Anker is on your list.
FAQ
Which has more capacity?
The Jackery, slightly: 1,070Wh versus 1,024Wh. That’s under a 5% difference in runtime.
Which charges faster from solar?
The BLUETTI Elite 100 V2, rated for 1,000W versus 400W on the Jackery.
Can either add an extra battery?
No. Jackery’s support page says the 1000 v2 doesn’t support battery packs, and the Elite 100 V2 is a single-unit design.
Which is better as a UPS?
BLUETTI lists 10ms or less; Jackery lists within 20ms and says it’s not a zero-interruption UPS. For desktop PCs, the faster switchover is the safer bet.
Can I charge either from a 24V truck?
BLUETTI’s manual says the Elite 100 V2 accepts 12V or 24V car outlets. Jackery lists the 1000 v2’s car input at 12–16V.
Which is quieter?
Jackery rates the 1000 v2 at 22dB or less; BLUETTI lists 50dB maximum for the Elite 100 V2.
Verdict
At the same $499, the BLUETTI Elite 100 V2 is the more capable all-rounder: more output, far more solar input, a faster laptop port and a longer warranty. The Jackery Explorer 1000 v2 is the quieter, lighter and simpler choice, with slightly more capacity and a high surge rating. Pick the BLUETTI if you’ll lean on solar or heavier appliances, and the Jackery if quiet nights and easy carrying matter most.