Categories
EcoFlow

EcoFlow TRAIL 200 DC Review: Specs, Ports and Who It’s For

EcoFlow’s TRAIL 200 DC puts a 192Wh LiFePO4 battery and 220W of total USB output into a 4-pound, 5.0 × 4.5 × 6.5-inch body, according to the user manual EcoFlow publishes for model EF-TX-192. It’s the smallest station in EcoFlow’s TRAIL series. It’s all USB: there are no AC outlets, no 12V car socket and […]

Categories
Jackery

Jackery Explorer 3000 v2 Review: Specs and Who It’s For

Jackery’s Explorer 3000 v2 packs a 3,072Wh LiFePO4 battery and a 3,600W inverter (7,200W surge) into a 59.5-pound case, with five 120V outlets including a TT-30 RV plug, according to Jackery’s official spec sheet for model JE-3000B. In the U.S., Jackery now sells it as the HomePower 3000: its Explorer 3000 v2 product link opens […]

Categories
BLUETTI

BLUETTI Apex 300 Solar Charging: Panels and Input Limits

BLUETTI’s Apex 300 accepts up to 2,400W of solar input across two XT60 ports, but only in Turbo charging mode. The default Standard mode caps solar at 1,440W, and Silent mode at 500W, according to BLUETTI’s Apex 300 user manual. Each port takes 12–60V open-circuit voltage and up to 20A. Those three numbers, 60V, 20A […]

Categories
DJI & Others

Generac GB2000 Review: Specs, Runtime and Who It’s For

Generac, best known for its home standby generators, also makes a battery-powered option: the GB2000 Portable Power Station (model G0080260). According to Generac’s spec sheet, it stores 2,106Wh in lithium-ion NMC cells, delivers 1,600W of running power with a 3,200W surge rating, and weighs 43 pounds. Generac lists an MSRP starting at $1,869 on its […]

Categories
BLUETTI

BLUETTI Elite 200 V2 Solar Charging: Panels and Input Limits

BLUETTI rates the Elite 200 V2’s solar input at up to 1,000W, 12–60V and 20A, and says a continuous 1,000W fills its 2,073.6Wh LiFePO4 battery in about 2.4 hours, according to the Elite 200 V2 user manual. The same manual includes a detail that decides how fast most owners actually charge: in the default PV […]

Categories
Anker SOLIX

Anker SOLIX C1000 Gen 2 Solar Charging Guide

Anker says its SOLIX C1000 Gen 2 can recharge fully from solar in about 1.8 hours with 600W of panels connected, according to the product page on Anker’s U.S. store. The fine print behind that number is the most useful thing to know about charging it from the sun: the station’s XT60i solar input has […]

Categories
Portable Power Stations

Power Station for Power Outages: How to Choose

U.S. electricity customers averaged 11 hours without power in 2024, nearly twice the annual average of the decade before, according to the U.S. Energy Information Administration’s Electric Power Annual. Major events such as Hurricanes Beryl, Helene and Milton accounted for 80% of those hours, and outages not tied to major events routinely average about two […]

Categories
EcoFlow

EcoFlow RIVER 2 Pro Solar Charging: Panels and Input Limits

EcoFlow’s RIVER 2 Pro pairs a 768Wh LiFePO4 battery with an 800W inverter, but its solar port tops out at 220W. According to the RIVER 2 Pro user manual, that port accepts 11–50V at up to 13A, and EcoFlow quotes a full solar charge in roughly 4.5 to 9 hours. The manual also notes that […]

Categories
BLUETTI

BLUETTI EB3A vs EcoFlow RIVER 3 Plus: Which Should You Buy?

BLUETTI’s EB3A and EcoFlow’s RIVER 3 Plus land in the same small-station class: both pair a LiFePO4 battery of under 300Wh with a 600W inverter, and both weigh about 10 pounds. Beyond that, they’re built for different jobs. EcoFlow’s U.S. store lists the RIVER 3 Plus at 286Wh with a sub-10 ms UPS switchover and […]

Categories
Anker SOLIX

Anker SOLIX C2000 Gen 2 vs F2000: Key Differences Explained

Anker’s SOLIX C2000 Gen 2 and the older SOLIX F2000 (sold originally as the PowerHouse 767) carry the same 2,048Wh of LiFePO4 capacity and the same 2,400W of continuous AC output, but they’re built very differently. Anker’s F2000 datasheet lists a 67.2 lb wheeled case with 1,440W of US wall charging and 1,000W of solar […]