Anker SOLIX C1000 Gen 2 vs Jackery Explorer 1000 v2

Anker’s SOLIX C1000 Gen 2 and Jackery’s Explorer 1000 v2 hold almost the same amount of energy, about 1kWh each, but they take different approaches to output and charging. According to Anker’s US product page, the C1000 Gen 2 pairs a 1,024Wh LiFePO4 battery with a 2,000W inverter and refills from the wall in 49 minutes with UltraFast charging. Jackery’s support documentation lists the Explorer 1000 v2 at 1,070Wh with a 1,500W inverter, 400W of solar input and fan noise rated at 22dB or less. On October 17, 2026, Anker’s store listed the C1000 Gen 2 at $549.99, and Jackery’s store listed the Explorer 1000 v2 at $499 in black.

As an Amazon Associate I earn from qualifying purchases, at no cost to you.

Anker SOLIX C1000 Gen 2 on Amazon · Jackery Explorer 1000 v2 on Amazon

We haven’t run these two side by side on camera yet, so this comparison is built from the makers’ spec pages and manuals. Timing and runtime figures marked “estimate” are our own math.

Pick by What Matters Most to You

You want the fastest wall recharge: C1000 Gen 2. Anker lists 0 to 100% in 49 minutes at 1,600W, versus about 1.7 hours for the Jackery’s standard charge.
You run bigger kitchen or shop appliances: C1000 Gen 2. It is rated for 2,000W continuous, versus 1,500W.
You charge from solar a lot: C1000 Gen 2. It accepts up to 600W versus 400W.
You want the quietest box in a bedroom or tent: Explorer 1000 v2. Jackery rates its fan at 22dB or less; Anker advertises “20dB operation” on its page but does not list it in the spec table.
You want the lowest price and the smaller footprint: Explorer 1000 v2. It costs $50 less at the makers’ listed prices and has a slightly shorter, narrower body.
You want a little more capacity: Explorer 1000 v2, by 46Wh. That is about 4.5% more, which is close enough that it rarely decides the purchase.

Spec Sheet Side by Side

Spec	Anker SOLIX C1000 Gen 2	Jackery Explorer 1000 v2
Battery	1,024Wh LiFePO4	1,070Wh LiFePO4
Rated life	4,000 cycles to 80%	4,000 cycles to 70%
AC output (continuous / peak)	2,000W / 3,000W	1,500W / 3,000W
Total ports	10 (per Anker)	Multiple AC, USB-C, USB-A and car outlets
Fastest USB-C	140W	100W
12V car outlet	12V, 10A (120W)	12V, 10A
AC charging	1,200W standard; 1,600W UltraFast (49 min to 100%)	About 1.7 hours standard; 1-hour emergency charge per Jackery’s store
Solar input	One XT60i: 11 to 28V at 8.2A, or 29 to 60V at 14.5A; 600W max	Two DC8020 ports: 16 to 60V, 10.5A each; 400W max
AC bypass (pass-through)	1,800W max	Not listed in our sources
UPS switchover	10ms	Within 20ms
Discharge temperature	-4°F to 104°F	14°F to 113°F
Expandable battery	No	No
Weight	24.9 lb	About 23.8 lb
Size	15.12 x 8.19 x 9.61 in	12.9 x 8.8 x 9.7 in
Brand-store price (Oct 17, 2026)	$549.99	$499 (black)

Sources: Anker SOLIX US product page for the C1000 Gen 2 (model A1763), and Jackery’s Explorer 1000 v2 Basic Information support page and store listing.

Output: What the Extra 500W Buys You

Both units list a 3,000W peak, so either one can usually handle the short startup spike of a fridge or small pump. The difference is continuous power. Here are common household appliances checked against each unit’s continuous limit. The wattages are typical label values, not our measurements.

Appliance (typical rating)	C1000 Gen 2 (2,000W)	Explorer 1000 v2 (1,500W)
Coffee maker, 900W to 1,100W	Yes	Yes
Microwave, 1,000W to 1,200W input	Yes	Yes
Electric kettle, 1,500W to 1,800W	Yes	Only at 1,500W or less
Hair dryer on high, about 1,800W	Yes	No
Induction cooktop at 1,800W	Yes	No (unless set to a lower power level)
Circular saw, 1,500W to 1,800W	Likely yes	Borderline
Space heater on high, 1,500W	Yes, but drains fast	At the limit

A reality check (our estimate): running 1,800W from a 1kWh battery empties it in roughly 30 minutes once inverter losses are included. The extra headroom on the Anker is about being able to run short, high-power jobs, not long ones. For more on startup spikes, see our guide to surge watts vs running watts.

Charging: Wall, Solar and Car

Wall Charging

Anker’s 49-minute figure uses UltraFast mode, which you turn on in the Anker app. Anker’s own FAQ says UltraFast only engages when the battery cells are above 68°F (20°C). Below that, charging slows significantly, so a station stored in a cold garage won’t hit 49 minutes. Anker also suggests using UltraFast only when needed, to prolong battery life. Its standard AC charge rate is 1,200W.

Jackery’s standard charge takes about 1.7 hours. Its store also advertises a 1-hour emergency charge mode. If you mostly charge overnight, both are fast enough. The Anker matters more when a storm is coming and you have an hour of grid power left.

Solar Charging

This is where the two differ the most in practice.

Anker C1000 Gen 2: a single XT60i input with two voltage bands. From 11V to 28V it accepts up to 8.2A, which is only about 230W at the top of that band (our math). From 29V to 60V it accepts up to 14.5A, up to the 600W maximum. To get anywhere near 600W, wire your panels so their operating voltage sits above 29V, for example two 12V-class panels in series. Anker lists a full solar recharge in about 1.8 hours with 600W of panels.
Jackery Explorer 1000 v2: two DC8020 inputs, each 16V to 60V at 10.5A and 200W, for 400W total. Jackery’s figures show about 3.8 hours with two SolarSaga 200W panels.

For campsite charging with one 100W to 200W folding panel, the two perform about the same, because the panel is the limit. The Anker’s advantage only shows up when you bring 400W or more of panels. Our portable solar panels for camping guide covers which folding panels match each station’s voltage window, and Jackery Explorer 1000 v2 solar charging goes deeper on the Jackery’s ports.

Car Charging

Both charge from a 12V outlet, which is slow on any 1kWh station. Plan on most of a long driving day for a full charge. Jackery lists about 12 hours on a 12V outlet. Anker includes a car charging cable with the Amazon bundle linked above.

Home Backup Details

For a desktop computer, router or CPAP, the UPS switchover time matters. Anker lists 10ms; Jackery lists within 20ms. Both are fine for most CPAPs and routers. Some desktop PCs with sensitive power supplies prefer a true online UPS either way. Anker’s spec table also lists 1,800W of AC bypass, meaning wall power passes through to your devices while the battery charges. Anker’s FAQ adds that the C1000 Gen 2 can charge from AC and solar at the same time, with solar prioritized.

Anker also includes a Time-of-Use mode in its app, which schedules charging and discharging around electricity rates. That is useful if your utility charges more in the evening. Neither unit accepts an add-on battery. Anker says that was a trade-off to cut size and weight, and points buyers who want expansion to the original C1000.

Living With Each One

Everyday factor	C1000 Gen 2	Explorer 1000 v2
Footprint	Longer (15.1 in) but narrow	Shorter (12.9 in), more cube-shaped
Carrying	24.9 lb	About 23.8 lb
App	Anker app (UltraFast, TOU mode)	Jackery app (emergency charge, modes)
Cold-weather use	Discharges down to -4°F	Discharges down to 14°F
Hot-weather use	Up to 104°F	Up to 113°F

Winter campers get a slight edge with the Anker’s lower discharge limit. Desert campers get a slight edge with the Jackery’s higher upper limit. Neither should be charged below freezing.

How They Compare to the Third Option

If neither feels quite right, BLUETTI’s Elite 100 V2 sits between them, with an 1,800W inverter and 1,000W of solar input. Read BLUETTI Elite 100 V2 vs Jackery Explorer 1000 v2 and Anker SOLIX C1000 Gen 2 vs BLUETTI Elite 100 V2 for those matchups. If you need more than 1kWh, Jackery’s bigger sibling is covered in Explorer 1000 v2 vs 2000 v2.

FAQ

Which is better, the Anker SOLIX C1000 Gen 2 or the Jackery Explorer 1000 v2?

For power and charging speed, the C1000 Gen 2: 2,000W output, a 49-minute UltraFast recharge and 600W of solar input. For a lower price, a smaller footprint and very quiet operation, the Explorer 1000 v2.

Which has more capacity?

The Jackery, slightly: 1,070Wh versus 1,024Wh. The difference is about 4.5%.

Can either one run a 1,800W appliance?

The C1000 Gen 2 can, within its 2,000W continuous rating. The Explorer 1000 v2 is rated for 1,500W continuous, so an 1,800W appliance exceeds its limit.

Does the Anker really recharge in 49 minutes?

That is Anker’s figure with UltraFast enabled in the app at 1,600W. Anker notes that UltraFast only engages when the battery is above 68°F. In colder conditions, charging is noticeably slower.

Can I use the same solar panels on both?

Often yes, with the right adapter, because both accept panels up to 60V. The Anker uses an XT60i connector and the Jackery uses DC8020. The Jackery splits input across two 200W ports, and the Anker needs above 29V to go past about 230W.

Can I expand the battery on either?

No. Neither model supports an add-on battery.

Bottom Line

Choose the Anker SOLIX C1000 Gen 2 if you want more output, faster wall charging and room for a bigger solar array, and don’t mind paying about $50 more. Choose the Jackery Explorer 1000 v2 if you want a quiet, compact 1kWh station at a lower price and your appliances stay under 1,500W. Either one will comfortably run a CPAP, router, laptop and fridge through a typical overnight outage.