Categories
Home Battery Backup

Anker SOLIX E10 vs EcoFlow DELTA Pro Ultra: Which to Buy?

Anker’s SOLIX E10 and EcoFlow’s DELTA Pro Ultra both start from a battery module of exactly 6,144Wh and both scale to about 90kWh, but they are built for different homes, according to the two makers’ U.S. spec pages. Anker rates one E10 at 7.68kW continuous, with surge figures The Verge reported at up to 28.8kW, […]

Categories
Solar Panels

Renogy 200W Solar Panel Kit: What You Get and How to Wire It

Renogy’s 200W 12V Starter Solar Panel Kit costs $229.99 on Renogy’s store and includes two 16BB N-type 100W panels, a Wanderer Li 30A PWM charge controller, 10AWG cables, Z-brackets and MC4 Y-branch connectors, according to the package list on Renogy’s product page. Renogy rates each panel at 22.79V open-circuit and 5.31A short-circuit, and the controller […]

Categories
RV & Van Electrical

Renogy 2000W Inverter Charger Review: Specs and Settings

Renogy’s 2000W 12V Pure Sine Wave Inverter Charger with LCD (model R-INVT-PCL1-20111S, from Renogy’s PCL series) combines a 2,000W inverter rated for 6,000W surge, a charger adjustable from 5A to 65A and a 16A automatic transfer switch with about a 10ms transfer time, according to Renogy’s product page and PCL series user manual. It’s a […]

Categories
Home Battery Backup

EP Cube vs Tesla Powerwall 3: Specs, Sizing and Which Fits

EP Cube 2.0 and Tesla’s Powerwall 3 both top out at 11.5 kW of continuous output and handle motor starts rated up to 185 A LRA, according to CSI Solar’s EP Cube 2.0 North America datasheet (V1.6, August 2026) and Tesla’s 2025 Powerwall 3 datasheet. Where they split is how they store energy. Powerwall 3 […]

Categories
Home & Tools

Emporia Vue 3 Review and Install Guide: Specs and Setup

Emporia’s Vue 3 (model EMV3A) clamps two 200A sensors around your home’s service mains and up to sixteen 50A sensors around individual breakers, then streams the readings to the Emporia app over 2.4GHz Wi-Fi or wired Ethernet, according to Emporia’s Vue 3 spec sheet and installation guide. Emporia rates its accuracy at ±2% and its […]

Categories
12V Fridges & Portable AC

ICECO Fridge Review: VL45 vs APL35 Specs and Runtime

ICECO’s two best-known 12V fridges take different approaches. The VL45 is a 45-liter (47.5-quart) single-zone metal fridge-freezer with a SECOP compressor, a 0°F to 50°F range and a $559 list price on ICECO’s U.S. store. The APL35 is a 37-quart dual-zone model with an aluminum body, a SECOP Nano compressor, Bluetooth app control and a […]

Categories
EcoFlow

EcoFlow TRAIL 200 DC Review: Specs, Ports and Who It’s For

EcoFlow’s TRAIL 200 DC puts a 192Wh LiFePO4 battery and 220W of total USB output into a 4-pound, 5.0 × 4.5 × 6.5-inch body, according to the user manual EcoFlow publishes for model EF-TX-192. It’s the smallest station in EcoFlow’s TRAIL series. It’s all USB: there are no AC outlets, no 12V car socket and […]

Categories
Jackery

Jackery Explorer 3000 v2 Review: Specs and Who It’s For

Jackery’s Explorer 3000 v2 packs a 3,072Wh LiFePO4 battery and a 3,600W inverter (7,200W surge) into a 59.5-pound case, with five 120V outlets including a TT-30 RV plug, according to Jackery’s official spec sheet for model JE-3000B. In the U.S., Jackery now sells it as the HomePower 3000: its Explorer 3000 v2 product link opens […]

Categories
BLUETTI

BLUETTI Apex 300 Solar Charging: Panels and Input Limits

BLUETTI’s Apex 300 accepts up to 2,400W of solar input across two XT60 ports, but only in Turbo charging mode. The default Standard mode caps solar at 1,440W, and Silent mode at 500W, according to BLUETTI’s Apex 300 user manual. Each port takes 12–60V open-circuit voltage and up to 20A. Those three numbers, 60V, 20A […]

Categories
Car Accessories

BLUETTI Charger 1 Setup Guide: App, Settings and First Use

BLUETTI’s Charger 1 can refill a portable power station from a vehicle’s alternator at up to 560W, and the company says that’s up to six times faster than a regular car outlet. According to BLUETTI’s user manual, the key setup step comes after the wiring: setting the output voltage in the BLUETTI app to match […]