EG4 Electronics makes its WallMount battery in two versions for different spaces. The WallMount 314Ah Indoor stores about 16kWh in an IP20 cabinet with active balancing and over-the-air firmware updates, according to EG4’s spec sheet. The WallMount 280Ah All Weather stores 14.3kWh in an IP65 enclosure with built-in self-heating, an LCD touchscreen and 600A busbars, […]
Anker’s SOLIX E10 and EcoFlow’s DELTA Pro Ultra both start from a battery module of exactly 6,144Wh and both scale to about 90kWh, but they are built for different homes, according to the two makers’ U.S. spec pages. Anker rates one E10 at 7.68kW continuous, with surge figures The Verge reported at up to 28.8kW, […]
EP Cube 2.0 and Tesla’s Powerwall 3 both top out at 11.5 kW of continuous output and handle motor starts rated up to 185 A LRA, according to CSI Solar’s EP Cube 2.0 North America datasheet (V1.6, August 2026) and Tesla’s 2025 Powerwall 3 datasheet. Where they split is how they store energy. Powerwall 3 […]
Enphase’s IQ Battery 10C puts 10.0 kWh of usable storage and four grid-forming microinverters into one wall-mounted cabinet, according to the company’s North American datasheet (DSH-00565, May 2025). Enphase rates it at 7.08 kVA of continuous output at 240V, with 56A of peak current for 3 seconds and up to 90A of locked-rotor current for […]
EcoFlow’s DELTA Pro Ultra arrives as two heavy modules, an inverter and a 6,144Wh battery, and getting it running takes about five steps: stack it, cable it, power it on, link the EcoFlow app and set a few energy limits. EcoFlow’s user manual (models EFYJ751-PCS-US and EFYJ751-BP) lays out each step, from locking the battery […]
SPAN and EcoFlow both sell “smart panels,” but the two products sit in different places in a home’s wiring and solve different problems. SPAN’s website describes the SPAN Panel as “the smartest electrical panel,” a replacement for your main breaker panel starting at $2,550 plus installation. EcoFlow’s user manual describes the Smart Home Panel 2 […]
Pairing a home battery with a generator is now built into several major backup systems. FranklinWH’s aGate can start and stop a generator automatically through an optional module. Enphase’s IQ System Controller 3G adds a dedicated generator port, which Enphase says works with most AC generators installed in the US. EcoFlow’s Smart Home Panel 2 […]
EG4 Electronics’ WallMount 314Ah Indoor battery stores about 16kWh in a single 51.2V lithium iron phosphate unit, with 12.86kWh usable at the company’s recommended 80% depth of discharge, according to EG4’s spec sheet (version 1.0.4) and user manual. It replaces the earlier 280Ah Indoor model in the same footprint, adds about 1.7kWh of capacity, and […]
HomeGrid’s Stack’d Series is a modular 48V LFP home battery that scales from 9.6kWh to 38.4kWh in a single stack and up to 576kWh with 15 stacks in parallel, with up to 14.4kW of continuous power from four modules or more, according to HomeGrid’s January 2026 specification sheet. It’s built from 4.8kWh modules that stack […]
Anker now sells two very different home battery systems: the SOLIX E10, launched at CES 2026 as a weatherproof, generator-ready whole-home backup that starts at $4,299 with one 6.144kWh battery, and the SOLIX X1, a modular, installer-sold home battery that grows in 5kWh steps, according to Anker’s US product pages and The Verge’s launch coverage. […]
